JBL Headphones Not Charging (11 Ways to Fix)
My sibling has been utilizing JBL headphones for several months and they have been functioning perfectly until a recent incident where they wouldn’t charge.
I conducted research on his behalf and discovered a variety of methods to resolve this issue.
If your JBL headphones won’t charge, here’s what you can do to resolve the issue.
JBL Headphones Not Charging
 If your JBL   headphones are not charging The inability to charge may stem from a contaminated or malfunctioning charge port, a faulty charging cord, software issues, unusual temperatures during charging, old firmware, or issues with the batteries or power adapter. To resolve these charging issues, one should clean or mend the charging port, swap out the charging cable, perform a reset on the headphones, ensure a proper charging climate, install the latest firmware updates, and replace both the batteries and the power adapter.
Should you find yourself uncertain about the actions to take at any point, continue perusing this article to gain understanding about the entire process.
1. Clean the Charging Port
Begin by making certain that the micro USB charging socket on your JBL earphones is free of any debris or dirt.
This could be a key factor in why your headphones suddenly cease to charge.
Various types of grime, detritus, pet hair, or fine dust can readily become lodged in the tiny charging port of your earphones. When dirt builds up in the port, it obstructs the path needed for charging, which in turn interferes with the electrical connection.
Therefore, it’s recommended to tidy up the power connection point on your JBL earphones.
You can clear out the USB charging port with a little cotton swab or by using an old toothbrush.
Polish the port using a brush, or alternatively, a burst of compressed air can be effective in removing dust particles.
2. Broken Charging Port
If, even after cleaning the charging port, your headphones still won’t charge, it’s possible that the port has become detached from the circuit board, preventing power from reaching the battery.
In this instance, it is necessary to reattach the charging port to the circuit board.
Though undertaking this task at home may prove difficult, it’s advisable to seek help from a professional technician. Prior to doing so, it would be beneficial to attempt the additional methods outlined further down.
3. Check The Charging Cable
Additionally, make sure to inspect the power cord of your charger. This component is particularly vulnerable on your headphones’ charging unit, as it is prone to snapping under any kind of strain.
In most instances, a faulty power cord is the primary reason behind your headphones’ inability to charge.
The internal conductors of the power cord are prone to snapping when twisted into compact loops. In some cases, the cords could be inferior and fail to meet the prescribed quality for JBL headphones.
It’s advisable to replace your current power cord. Consider utilizing a high-quality power cable to charge your JBL headphones.
Tip: Additionally, make sure not to fold or twist your power cord going forward, to stop it from becoming damaged.
4. It’s Time to Reconfigure Your Earphones
Occasionally, charging issues with headphones stem from software malfunctions and flaws. Therefore, restoring them to their original factory settings could remedy the problem in such instances.
Uncertain about the method for restoring your JBL headphones to their original settings?
Here are the instructions for resetting your JBL Tune headphones, applicable to the entire JBL Tune series:
- Activate your headphones and disconnect them from your current device.
- Disable Bluetooth on all nearby devices.
- Press and hold Increase the volume and decrease the volume. buttons simultaneously for more than 15 seconds .
- Release buttons when the LED indicator begins blinking and reset is completed.
Here’s a guide to restarting your JBL Live headphones, a method that works for all models in the JBL Live series.
- Make sure your headphones are turned on and disconnected from all devices.
- Additionally, deactivate Bluetooth on every one of your gadgets.
- Then press and hold the Volume + and Volume – Hold down the buttons at the same time for a duration exceeding five seconds.
- Release buttons when the LED indicator Begins to flash or blink, indicating that the reset process has been successfully finished.
Here’s a guide on how to restart the JBL Everest series.
- Disconnect the headphones from your gadget and switch them off.
- Additionally, turn off the Bluetooth function on every one of your gadgets.
- Then press and hold the Power button for more than 7 seconds .
- Press and hold the button until you observe the LED light flashing, at which point you can let go as this signifies the reset has been successfully finalized.
Proceed to connect the charger to your headphones and check if they start to charge. If there’s no response, attempt to reset them an additional two or three times.
Pro Tip: Should you encounter difficulty in resetting your JBL headphones, attempt to do so by connecting them to the charger and then proceeding with the reset process.
5. Charge Overnight
Should the issue with your JBL headphones not charging continue even after a reset, it’s recommended to leave them to charge for a minimum of 8 hours or keep them connected overnight.
Because at times they have been completely depleted of power, as a result, they require an extended period to recharge.
In this instance, it is necessary for you to endure a waiting period that is extended beyond the norm.
Pro Tip: Make sure to recharge your headphones before they run out of power completely. Allowing the battery to deplete entirely could cause harm to it.
6. Low or High Temperature
Should your JBL headphones have been exposed to either very high or very low temperatures for a period of time, they may not charge. This is because headphones are designed to not operate under extreme temperature conditions to prevent any harm to their internal components.
In this situation, it is necessary to keep your headphones at the proper temperature to ensure they charge correctly.
To illustrate, should your JBL headphones become overheated, it’s advisable to cool them down by situating them in an air-conditioned space for several minutes. Conversely, if they feel too cold, it would be beneficial to warm them up by placing them close to a heating source for a brief period.
Once the temperature has been stabilized, connect the charger; they ought to start charging at this point.
7. Update Firmware
In certain instances, the charging issue with your JBL headphones may be attributed to the firmware being outdated.
In this scenario, it is necessary for you to upgrade the software embedded in your headphones.
If you’re unsure about how to proceed with a firmware upgrade, refer to the following instructions.
- Begin by downloading and installing the JBL application onto your device.
- Then open the JBL app.
- Next, plug in your headphones to the app and choose the headphones within the app interface.
- Once you have chosen your headphones, details regarding the upgrade will be displayed to you.
- Should an update be ready, an orange circle will appear for you to see.
- Tap on the circle and tap install.
8. PC in Sleep Mode
When you connect your JBL headphones to a computer and the computer enters sleep mode, they will not be able to charge since the computer ceases to provide power during this mode.
Consequently, if the intention is to charge your headphones, it is advisable to turn off the sleep function on your computer.
To turn off sleep mode, please carry out the following instructions.
- First, go to the settings of your PC.
- Go to System and Power.
- Proceed to rest and choose the ‘never’ option from the drop-down list.
9. Replace the Batteries in Your Headphones.
If your The headphones continue to remain uncharged despite having been reset.It’s very likely that the batteries in your headphones have run out of power.
You need to purchase new batteries in order to restore their functionality. Ensure you get a replacement set of batteries for your headphones that have the proper polarity.
Insert the batteries and check to see if replacing them fixes the charging problem with your headphones.
I recommend that you visit a professional to get your battery replaced, as it may be difficult for you to attempt the task on your own at home.
You are able to purchase the new battery from.   Amazon You can find replacement batteries on websites like Amazon, eBay, and Aliexpress, with prices ranging from $15 to $17, depending on the model of your headphones. Overall, the total expense for replacing the battery will be around $20.
10. Double-check the charging case.
The JBL headphones include a premium charging case that quickly replenishes the earbuds’ power, revitalizing them as if they were brand new.
Should you be employing an older charging case or a different one than the original, it’s important to conduct an inspection of everything it contains. Make sure to examine the charging connectors, the power adapter, and the USB port plug/connection.
The charging connectors are prone to wear and tear. Over time, they frequently become damaged or corroded due to exposure to air, which leads to the inability of your headphones to charge.
At times, the pins might be inserted excessively deep or required to extend outward in order to correctly align with the socket.
Employ a pair of pliers to extract the pins and remove any rust accumulation to restore functionality to the charging case.
11. Opt for a different power supply instead of relying on a USB port for charging.
If you’re experiencing charging problems with your headphones due to the USB port, consider utilizing a different charging source instead of the USB.
As an illustration, you have the option to remove the batteries from your headphones and replenish their power with the help of a battery charging device.
Reaching out to JBL Customer Support.
Regrettably, should all the previously suggested techniques prove unsuccessful, it will be necessary to reach out to JBL’s customer support team for additional help.
The contact details are available on the warranty card or within the instruction guide that comes with the headphones.
If there is still time left on the warranty, utilize the warranty card to get a complimentary fix. But even after the warranty of your headphones expires, you can have them repaired by the company for a fee.
Alternatively, a skilled technician is also capable of effectively repairing the JBL headphones.
Conclusion
Here’s everything we have on resolving the issue of your JBL Headphones not charging.
I trust that you’ll be able to fix the problem with the charger by trying out one of the suggested methods provided earlier.
We hope you find the perfect fix for your JBL headphones. Please inform us about which trick was successful in resolving your issue.
FAQs
Is there a reset button on JBL headphones?
Certainly, the JBL headphones are equipped with a distinctive feature that allows them to be reset using a dedicated button.
Holding down the power button for more than 30 seconds initiates a reset of the headphones, restoring them to their original out-of-box state.
How can I ascertain if my JBL headphones are in the process of charging?
The JBL headphones are equipped with a tiny red indicator that turns to a vibrant green color while your headphones are in the process of charging.
Once your headphones reach full charge, the indicator light flashes green accompanied by a beep.
Is it Possible to Overcharge JBL Headphones?
Certainly, however, excessively charging your JBL headphones may harm the battery and also deteriorate the audio performance of the unit.
To prevent overcharging, the headphones have a unique light system to notify you whenever your headphones are fully charged.
