Skullcandy Indy Left Earbud Not Charging (Fixed)

Don’t be concerned if you find that your left Skullcandy Indy earbud isn’t charging; there’s a solution to this issue.

Recently, I encountered a similar issue and felt irritated due to my inability to enjoy music like before.

Despite the challenges, I maintained a positive outlook and turned to the internet for a solution. By perusing various discussion threads and viewing instructional videos, I was able to repair my earphones successfully.

So, you can also, therefore, read on!

How to Troubleshoot and Resolve Charging Issues with the Left Earbud of Skullcandy Indy?

Keep in mind that these solutions are effective only when your Skullcandy Indy earbuds have not sustained any physical harm.

If your earbuds no longer charge due to being dropped on the ground or submerged in water, it is advisable to seek the expertise of a skilled technician.

Alternatively, if that doesn’t apply, continue reading to troubleshoot your left earphone.

 1. Clean the Left Bud 

The initial step is to cleanse the contact points on your left Indy earbud used for charging.

Charging pillars are susceptible to outdoor conditions and earwax build-up, leading to debris and wax collection on these components. Consequently, this prevents the power from transferring effectively from the case to the earbuds.

Therefore, it is advisable that you clean your earbud.

To clean, use a soft-bristled toothbrush. Apply a small amount of rubbing alcohol to the bristles and carefully brush the charging contacts.

Make certain that any grime has been cleaned off and that it is fully dry prior to putting it in the charging case.

 2. Clean Charging Case 

You should also make sure to cleanse the pins located on the left side within the charging case.

Occasionally, grime builds up on the charging case pins which prevents electrical conductivity. Therefore, it’s advisable to clean these contact points regularly to ensure proper function.

To clean, apply a small amount of isopropyl alcohol to the toothpick and carefully rub it against the pins.

Next, using a gentle cotton cloth, clear away any residual matter and ensure the pins are thoroughly dried.

Your left Indy earbud and the left compartment of the charging case have been thoroughly cleaned. Place the earbud back in the case to confirm if it starts charging.

 3. Correctly Place Bud 

Occasionally, you might forget to put the left independent earbud back into its case, resulting in it not being charged.

Therefore, it is crucial to ensure that the earbud is correctly positioned in its holder, with the charging contacts properly connected to the corresponding connectors.

Ensure that you are able to gently squeeze the bud.

Make sure to avoid using too much force as this could worsen the damage to the case or the earpiece.

4. Correctly Attach the Ear Tips to the Left Earbud

Ear tips serve as the contact point between your earbuds and the inside of your ear. However, on occasions, the ear tips can cause issues by preventing the earbuds from fitting properly in their charging case, resulting in a failure to charge.

Therefore, you must make certain that the ear tip of your left Indy earbud is correctly positioned onto it.

If not, ensure the earbud is correctly positioned and placed in the case for charging.

 5. Reset Skullcandy Indy 

You’ve completed every tangible action that could fix the charging issue with your earbud. However, there are also several digital checks you need to make sure are in order.

At times, your earbuds might not charge because of certain issues. Therefore, the initial step should be to reset your Skullcandy Indy earbuds.

Restarting your earbuds can eliminate small malfunctions and enhance their functionality. Therefore, it is advisable to reset your earbuds before attempting to charge them again.

Here are the instructions to restart your Skullcandy Indy earphones.

• Place both buds in the charging case.
• Remove them from all paired devices.
• Turn off Bluetooth on all your devices.
• Take out solely the left earpiece from its container and press the middle of it four times.
• Upon successfully resetting, the light indicator on the earbud will change to a red color.
• If a red light is not visible, persist in resetting the earbuds until the red light appears.
• Next, put the left earbud into the case and let it charge for several hours.

 6. Update Firmware 

It’s also important to upgrade your earbuds’ firmware since older versions may become vulnerable to malware.

Therefore, it is advisable for you to upgrade your Skullcandy earbuds.

To update your Skullcandy earbuds, please proceed with the following instructions.

• Install the Skullcandy application on your gadget by downloading it.
• Next, link your earbuds with both the device and the application.
• Open the app.
• Should there be an update accessible, a notification to that effect will become visible to you.
• Click on ‘Update Earbuds’ and adhere to the steps displayed on the screen to finish the process.

In the event of a firmware malfunction, make certain to verify the following aspects.

• Make sure the earbuds are charged to a minimum of 25% battery life; if their charge is lower than that, you should charge them before using them.
• It is essential to have a reliable internet connection.
• Make certain that your phone or any other gadget you’re utilizing is at least 30% charged; if it falls below that level, plug it in for a recharge.
• Additionally, ensure that the earbuds are paired with the phone and linked with the Skullcandy application.

 7. Contact Skullcandy 

If none of the troubleshooting methods resolve the issue with your Skullcandy Indy not charging, it is advisable to reach out to the Skullcandy customer service team for more comprehensive assistance.

Nonetheless, I reached out to Skullcandy, and initially, they suggested the same fundamental diagnostic steps that we have already talked about in this article.

Eventually, they will request that you exchange the earbuds or send them back. Skullcandy typically offers a warranty that lasts for one year.

Therefore, if your Skullcandy Indy earbuds are still covered by the warranty, my advice would be to send them back and obtain a replacement pair.

 Conclusion 

The piece discussed methods for resolving the issue of a non-charging left earbud from Skullcandy. It is our hope that you find a solution that resolves your problem. Please feel free to share in the comment section if you found this article useful. Additionally, continue to check in with us for further insights on headphones and earbuds.