Skullcandy Push Active Not Charging ( how to fix)

If your Skullcandy Push Active is not able to charge, there are several potential causes. These include dirt on the earbuds and charging case pins, earbuds not properly placed in the case, software issues, a defective charging case, outdated firmware, or a faulty charging cable or wall adapter. To resolve this issue, you will need to clean the charging poles and case pins of the earbuds, ensure the earbuds are correctly positioned in the case, reset the earbuds, update the firmware, and consider purchasing a new charging cable or wall adapter.

If you are unfamiliar with the meaning and execution of each step, continue reading in order to acquire comprehensive knowledge.

 1. Clean Earbuds 

Your Skullcandy Push Active could be experiencing charging issues due to the presence of dirt or particles on its charging terminals.

Additionally, consistent usage of earbuds leads to an accumulation of earwax on the charging terminals of the earbuds. This impedes the flow of electric current, resulting in the earbuds being unable to charge.

So, in order to address this issue, it is recommended to properly clean your Skullcandy Push Active. For this task, you will require a gentle cotton cloth, a toothpick, and rubbing alcohol.

Carefully drizzle a small amount of rubbing alcohol onto the cotton fabric and use it to rub the charging poles of the earbuds. After that, gradually eliminate any dirt from the poles using a toothpick and wipe away all debris using the cotton cloth.

Now, your Skullcandy Push Active is prepared for charging.

 2. Clean Charging Case Pins 

cause connection issues and affect the overall performance of your earbuds.To avoid the flow of electricity, your Skullcandy Push Active will not be able to charge.

Therefore, it is also crucial to clean the pins on the charging case.

alcohol onto a cotton cloth and use a toothpick to clean the pins.Dampen the cloth with alcohol and gently use it to touch the pins. .

Next, use a toothpick to eliminate any debris that may be stuck on the pins, and proceed to wipe them clean using a cloth.

Once you have finished cleaning the charging poles and charging case pins of your Skullcandy Push Active, proceed to put the earbuds into the case with the hope that they will begin charging.

3. Ensure that the case is correctly positioned.

Occasionally, your earbuds may fail to charge due to incorrect positioning of the ear tips or improper placement of the earbuds within the charging case.

First, ensure ear tips are positioned accurately on the earphonesGenerally, earbuds tend to not fit properly in the charging case.

Next, make sure that the earbud charging poles are properly aligned with the pins inside the case when you insert them.

Once you have put the charging case in the correct position, make sure to securely shut the lid of the charging case.

Earbuds do not recharge while the cover of the case is open.

4. Restart Skullcandy Push Active

Occasionally, Skullcandy Push Active may cease to charge due to software malfunctions or errors.

Resetting is the most effective way to resolve small issues and errors with earbuds.

For this reason, it is advised that you reset your Skullcandy Push Active.

Here are the steps to reset your Skullcandy Push Active.

Disable Bluetooth and delete earbuds from the list of devices connected.

Activate both earbuds by taking them out of the case.

Afterwards, keep your finger pressed on the right earbuds for a duration of 3 seconds.

Let go of the button either when you hear a sound or when the right earbud blinks purple three times.

 5. Faulty Charging Case 

The reason Skullcandy Push Active cannot charge is due to a malfunction in the charging case. Typically, a faulty charging case indicates that its battery has been compromised.

Due to a damaged battery, the charging case is unable to retain power, thus preventing the earbuds from being charged.

Often, the reason for the malfunctioning of the charging case battery is either moisture or physical harm.

Hence, in order to resolve the issue, you ought to expose the case to sunlight for a brief period of time.

But, in the case that you have let go of the situation, it is possible that the power cable is no longer attached to it.The battery is not transferring the current to the pins on the case. .

If you encounter this situation, it would be necessary for you to visit a gadget technician who will promptly repair it because attempting to fix it at home would be challenging for you.

 6. Properly Charge Case 

able to charge the Skullcandy Push Active earbuds when they are placed inside.Due to this issue, the earbuds are not charging correctly and consequently, they stop charging.

As a result, it is necessary to ensure that you correctly charge your case by utilizing the original USB cable for this purpose.

Additionally, ensure that you securely insert the charging cable into the charging case port.

Additionally, make sure to also clean the charging cable and charging port of the case.

 7. Drain Earbuds 

If your inexpensive earbuds are not fully charging, their battery level remains unchanged even after being charged for several hours.

Then you should drain your The battery of the earbud lasts for a day.In this manner, the earbuds will consume the entire battery and eliminate any small glitches.

To do so, To begin, disconnect and take out the earbuds from all devices.Afterwards, remove both earbuds from the charging case and leave them untouched for a duration of 24 hours.

In this manner, the earbuds will stay powered on while they look for a device to connect with, causing their battery to deplete entirely.

Once you have depleted the battery, place both earbuds in the case in order to completely charge them.

 8. Update Firmware 

obsolete software on your Skullcandy Push Active may be causing the inability to charge your earbuds.The most recent firmware update will get rid of any malfunctions in your earbuds and improve their overall functionality.

If your Skullcandy Push Active firmware is not up to date, make sure to update it.

• In order to refresh the firmware, you can obtain the Skullcandy app and proceed with the installation.
• Then connect your earbuds with the app.
• Launch the application and navigate to the update feature located on the product card.
• If it is accessible, go ahead and download and install it.

What actions should be taken if an update is unsuccessful?

If the firmware update for your Skullcandy Push Active is unsuccessful, you should examine the following factors.

• Make sure that your earbuds have a minimum battery level of 25% before you update them.
• Your device enjoys a strong connectivity to the internet.
• It is advisable for your phone to possess a minimum of 30% battery charge.
• The connection between the earbuds and phone is required for accessing the Skullcandy app.

9. Keep the Earbuds at a Consistent Temperature

Your Skullcandy Push Active may cease to charge when exposed to very cold or hot conditions due to the lithium-ion batteries inside becoming non-functional in such extreme temperatures.

If you have been using your earbuds in a sauna, steam room, or extremely cold weather.

As a result, they ceased to charge. Consequently, it is essential to return your Skullcandy Push Active to its regular temperature, also known as room temperature, first.

Leave your earbuds in the room for a duration of 2 to 3 hours, then attempt to charge them.

10. Defective charging cable or wall adapter

If your earbuds are not able to charge, it could be because the charging cable or wall adapter that you are using is not functioning properly.

Due to an malfunctioning charging cable or wall adapter, your charging case is unable to charge, causing your earbuds to not charge.To begin, connect the charging cable to the case and check the LED indicator.

If the charging cable is blinking, it indicates that it is not defective. But, if the LED on your charging case is not blinking, it means that either the charging cable or the wall adapter is defective.

Attempt using a different wall adapter in combination with the charging cable you currently have; if that does not yield any results, test a different charging cable with the wall adapter you currently have.

By doing this, you can determine the source of the problem. Therefore, purchase a new charging cable or wall adapter for the problematic item.

 Conclusion 

In case your Skullcandy Push Active is not able to charge, you can attempt the suggested steps to troubleshoot the issue.

• Initially, it is necessary to clean the charging poles and pins of the charging case for the earbuds.
• Ensure that you correctly position earbuds into the charging case.
•  Reset earbuds. 
• Make sure to charge the charging case correctly.
•  Drain earbuds for 24 hours. 
• Please ensure that the firmware of the earbuds is kept up to date.
• The act of keeping the temperature stable may not be appropriate.
• Replace the faulty charging cable or wall adapter with a new one.

If none of these methods are effective for you, it is advisable to reach out to Skullcandy’s customer support for assistance. Alternatively, if your earbuds are covered by warranty, you can return them and obtain a replacement pair.

How to FIx

Galaxy buds case not charging no lights

how to get best surround sound for gaming
Bose Qc Earbuds flashing red and white (Solved)
how to properly tuen off your Airpod Max
aftershokz keeps Beeping Easy Fix
how to fix airpod pro problems

Reviews

The AKG K553 Mkii Closed back Reviews
JBL reflect Flow Pro Active Earbuds True Wireless Review
The Toatronics TT Bh085 Noise Cancelling headphones reviewBose 700 Noise cancelling Headphones Reviews