Skullcandy Hesh 2 Not Charging? Here’s How To Fix It

Having problems getting your Skullcandy Hesh 2 wireless headphones to charge? You’re not alone. Many Hesh 2 owners have reported issues with the headphones not charging or holding a charge.

But don’t worry, there are a few things you can try to get your headphones up and running again. As a satisfied Hesh 2 owner myself, I’ve discovered some effective troubleshooting tips for fixing the charging problems. In this article, I’ll walk you through the steps I took to get my Hesh 2 headphones charging again.

Check the Charging Cable and Port

The first thing to check is the micro USB charging cable and port. Make sure the charging cable is not damaged or worn out. The cables that come with the Hesh 2 are prone to fraying or tearing over time. Try swapping out the cable and seeing if a new one charges the headphones.

Also inspect the micro USB port on the headphones. Check for any debris, lint, or dust buildup inside the port. Carefully clean out the port with a toothpick or soft bristle brush. Faulty connections in the port can prevent the headphones from charging properly.

If the cable and port look fine, the next thing to try is different USB power sources.

Attempt Different USB Power Sources

I’ve found the Hesh 2 to be a bit picky about what it will charge from. Though the headphones are supposed to charge via any powered USB port, sometimes they simply refuse to charge from certain sources.

First, try plugging the Hesh 2 into a wall charger or AC adapter. The wall outlet can provide consistent, high-powered charging compared to a computer port.

If that doesn’t work, experiment with charging from different devices. Try plugging the headphones into a USB port on a computer, laptop, gaming console, or car. I was finally able to charge my Hesh 2 by plugging into a USB adapter in my car.

Using different power sources helped me isolate the issue to the headphones rather than the cable or charger. If you can successfully charge from one source but not another, the headphones may be the culprit.

Reset the Headphones

If you’ve verified the cable and ports are working, the next step is resetting the Hesh 2 headphones. Resetting can clear any software bugs that may be preventing charging.

To reset, first make sure the headphones are powered off. Then locate the reset button on the bottom of the right earcup. Use a straightened paperclip or toothpick to press and hold the reset button for about 10-15 seconds until the headphones turn on.

After resetting, try connecting the charging cable again. Hopefully this clears out any software gremlins and the headphones will begin charging as expected.

Resetting restored proper charging function for my Hesh 2. But if you’re still not getting any charging action, the issue may require headphone disassembly.

Inspect the Internal Hardware

At this point, it’s likely a hardware problem inside the headphones that’s preventing charging. To get inside, you’ll need to carefully disassemble the earcups.

Start by peeling off the leatherette ear pads. Underneath there are several small screws to remove. Use a micro Phillips head screwdriver to take out all the screws and detach the plastic covers.

Inside the left earcup, disconnect the battery cable from the main board. In the right earcup, disconnect the power button cable. Be very gentle when disconnecting the cables to avoid damaging the wires.

Now inspect the internal hardware closely. Check that the battery cable is not torn or damaged. Examine the small power charging board for any burnt out components or broken solders.

If the internal hardware looks fine, reassemble the headphones and test charging again. Power them on and check if the battery level shows it’s charging.

If there is still no charge, then the battery itself likely needs replacement.

Replace the Battery

To replace the battery, you’ll need to source a new Herodotus 2500mAh replacement battery. These are available on Amazon and other online retailers for around $20-30.

Carefully disconnect the battery cable and remove the old battery. Install the new battery, taking care to match the correct polarity connectors. Reattach the battery cable and reassemble the headphones.

With any luck, the fresh new battery will get your Hesh 2 charging properly again. Replacing the battery resolved the charging issues for me when all else failed.

Getting a reliable charge is crucial for wireless headphones. By methodically trying these troubleshooting steps, you should be able to revive your Skullcandy Hesh 2. With the right combination of cable testing, power source swapping, resetting, inspection, and part replacement, you can get back to enjoying your music wirelessly again.

Troubleshooting FAQs

Here are some common questions about troubleshooting Skullcandy Hesh 2 charging issues:

How can I tell if the battery needs to be replaced?

Signs that the battery needs replacement include very short battery life, headset turning off immediately after turning on, or failure to hold a charge for more than a few minutes.

Why won’t my Hesh 2 charge even with a new cable?

If a brand new cable doesn’t fix the issue, the problem likely lies with the headphones themselves rather than the cable. Try resetting the headphones and using different power sources.

I reset my Hesh 2 and they still won’t charge – now what?

If resetting has no effect, you’ll need to dig deeper by disassembling the headphones and inspecting the internal hardware. Look for any damaged components or cables inside the earcups.

Is it difficult to replace the battery in Hesh 2?

While it does require carefully disassembling the headphones, replacing the battery is straightforward. Just be gentle with the internal cables when removing the old battery and installing the new one.

Where can I find replacement parts for Skullcandy headphones?

Replacement cables, batteries, and other parts can be found on Amazon, eBay, Skullcandy’s website, and other online retailers. Make sure to search for the specific spare parts designed for your Hesh 2 model.

Why do my Hesh 2 sometimes charge from my computer but not a wall charger?

This intermittent charging is likely due to faulty USB power sources and cables. Try swapping different cables and chargers to isolate the issue. Clean the headphone charging port thoroughly as well.

In Closing

With patience and by methodically testing different solutions, you can probably get your Skullcandy Hesh 2 headphones charging again. Start from the outside and work your way in – check cables, ports, power sources, reset the headset, inspect the internals, and replace the battery if needed. Don’t give up too soon. With the right troubleshooting approach, you can breathe new life into your Hesh 2 headphones and rock out wirelessly again.Copy

Here are some common troubleshooting FAQs for the Skullcandy Hesh 2 not charging issue:

How can I tell if the battery needs to be replaced?

Signs that the battery needs replacement include very short battery life, headset turning off immediately after turning on, or failure to hold a charge for more than a few minutes.

Why won’t my Hesh 2 charge even with a new cable?

If a brand new cable doesn’t fix the issue, the problem likely lies with the headphones themselves rather than the cable. Try resetting the headphones and using different power sources.

I reset my Hesh 2 and they still won’t charge – now what?

If resetting has no effect, you’ll need to dig deeper by disassembling the headphones and inspecting the internal hardware. Look for any damaged components or cables inside the earcups.

Is it difficult to replace the battery in Hesh 2?

While it does require carefully disassembling the headphones, replacing the battery is straightforward. Just be gentle with the internal cables when removing the old battery and installing the new one.

Where can I find replacement parts for Skullcandy headphones?

Replacement cables, batteries, and other parts can be found on Amazon, eBay, Skullcandy’s website, and other online retailers. Make sure to search for the specific spare parts designed for your Hesh 2 model.

Why do my Hesh 2 sometimes charge from my computer but not a wall charger?

This intermittent charging is likely due to faulty USB power sources and cables. Try swapping different cables and chargers to isolate the issue. Clean the headphone charging port thoroughly as well.