Skullcandy Earbuds not Charging (10 easy Fix )

Until yesterday turned sour when my Skullcandy earphones ran out of power. Upon attempting to charge them, it became evident that my Skullcandy earbuds weren’t receiving any charge.

Yet, I opted to plug them in for a short while and upon returning, discovered they weren’t taking a charge. This left me quite disheartened, as it meant I could no longer listen to my tunes.

Despite the challenge, I understood that it was crucial to diagnose the issue. Therefore, following extensive investigation, I succeeded in identifying the fault and rectifying it.

If your Skullcandy earbuds are failing to charge, please take a look at the troubleshooting solutions we’ve provided below.

Table of Contents

Skullcandy Earbuds Not Charging

If your Skullcandy earbuds aren’t powering up, the issue might stem from unclean charging connectors on the earbuds and case, improper positioning of the earbuds, software errors, a malfunctioning charging case, out-of-date software, or a defective charging cord or adapter. To solve these issues, you should clean the earbud charging contacts and case connectors, ensure the earbuds are correctly seated in the case, perform a reset on the earbuds, update the firmware, or consider purchasing a replacement charging cable or adapter.

Should you be unfamiliar with the individual steps and the methods for executing them, continue reading to acquire comprehensive knowledge.

1. Clean Earbuds

The inability of your Skullcandy earphones to charge could be due to the accumulation of dust or other particles on the charging contacts.

Frequent usage of earbuds leads to the accumulation of earwax on the charging contacts of the earbuds. This buildup hinders electrical connectivity, preventing the earbuds from charging properly.

To resolve this issue, it’s recommended that you clean your Skullcandy earbuds. For the cleaning process, have a gentle cotton cloth, a toothpick, and some isopropyl alcohol on hand.

Carefully drizzle a small amount of isopropyl alcohol onto a piece of cotton fabric and dab it onto the earbud’s charging contacts. After that, cautiously use a toothpick to pick off any accumulated grime from the charging contacts and subsequently wipe away all the debris using the cotton cloth.

Your Skullcandy earbuds are now prepared for charging.

2. Clean Charging Case Pins

Just like you would with earbuds, ensure to clean the charging case pins of your Skullcandy earbuds. This is because any grime on the pins could similarly interfere with the charging process.Stop the flow of electricity, and consequently, your Skullcandy earphones won’t be able to charge.

Therefore, it is vital to clean the pins in the charging case as well.

To clean the pins, gather a piece of cotton fabric, a toothpick, and some isopropyl alcohol. Begin by dispensing a small quantity of the rubbing alcohol onto the cloth.Dab some alcohol onto the fabric and gently rub it onto the pins. .

Next, use a toothpick to clear any debris from the pins and wipe them down with a fabric.

Once you’ve wiped down the charging contacts on your Skullcandy earbuds and the corresponding pins in their charging case, insert the earbuds into the case. With any luck, they should begin to charge.

3. Correctly position within the container.

At times, the reason your earphones aren’t charging could be due to incorrectly positioning the ear tips or misaligning the earbuds within their charging case.

First, ensure ear tips are Correctly positioned on the earpiecesGenerally, they prevent the earbuds from fitting properly into the charging case.

Secondly, verify that the earbuds’ charging contacts are properly aligned and make a connection with the contact pins in the charging case when you put them inside.

Ensure that the charging case is closed properly after placing the earbuds into it for charging.

Earbuds will not recharge if the case cover remains open.

4. Reset Skullcandy Earbuds

Occasionally, charging issues with Skullcandy earbuds may arise due to software malfunctions or errors.

Restarting earbuds is an ideal way to resolve small technical issues and software errors.

Hence, you ought to restart your Skullcandy wireless earphones.

Here is how you can reset your Skullcandy Indy Evo earbuds .

First unpair earbuds from your device.
Eliminate them from your device’s list of paired connections.
To switch off the earbuds, press and hold the power button on each one for over six seconds.
Proceed to activate the earbuds by pressing and holding the power button for a duration of 10 seconds.
Next, insert both earpieces into the charging case and pause until they emit a red flashing light.
Now take out both earpieces, and the reset process is finished.

To reset your device, please adhere to the subsequent instructions. Skullcandy Jib.

Take both buds out of the case.
To switch off the earbuds, press and hold their buttons for a duration of four seconds.
Hold down on each earbud for a duration of 10 seconds.
This activates and deactivates the buds, causing them to restart.

Proceed with the outlined instructions to restore your Skullcandy Sesh earbuds to their default settings.

Take out each of the earpieces from their charging container.
Proceed to deactivate them by holding your finger on the earbuds for a duration of four seconds.
Hold down each of the earbuds for 10 seconds after they have been powered down.
After that, the earbuds will reset.

Please adhere to the subsequent instructions if you need to reset your Skullcandy dime earbuds .

First unpair buds from all devices.
Erase the paired buds from the list of connected devices on all gadgets.
Remove both earpieces from the charging case to activate them.
Click twice on the button of each earbud and maintain the press for two seconds.
Skullcandy dime is successfully reset.

5. Faulty Charging Case

The inability of the Skullcandy earbuds to charge is due to a malfunction in the charging case. This often indicates that the case’s battery is defective.

Due to the faulty battery, the charging case is unable to retain power, thereby preventing your earbuds from charging.Typically, the battery within a charging case ceases functioning due to dampness or damage from physical impacts.

Hence, to resolve the issue, you should let the case sit in the sunlight for several minutes.

Nonetheless, should you have discontinued the use of the case, it is possible that the power cord may have become disconnected from theThe battery is not conducting electricity to the pins on the case. .

In this scenario, it is necessary to seek out a device repair expert. They will swiftly resolve the issue, as attempting to repair it on your own at home may prove to be challenging.

6. Properly Charge Case

When you put your Skullcandy earbuds into the charging case, they should power up. Nonetheless, there may be occasions when the charging case doesn’t function properly.Due to the issue, the earbuds are unable to charge effectively and consequently cease to charge.

Hence, it is important to adequately charge your case using the authentic USB cable provided for charging.

Ensure that the charging cable is securely connected to the port on the charging case.

Additionally, ensure that both the charging cable and the case’s charging port are kept clean.

7. Drain Earbuds

If your inexpensive earbuds fail to fully charge, the battery percentage does not increase despite being connected to power for several hours.

Then you should drain your The earbud’s battery lasts for 24 hours.Using earbuds in this manner ensures they are fully charged and any small glitches are eliminated.

To do so, Begin by disconnecting and deleting the earbuds from every connected device.Next, take both earbuds out of their charging case and leave them outside for a full day.

In this manner, the earbuds will continue to be active as they look for a device to connect with, leading to the full depletion of their power reserve.

Once you’ve depleted the battery, insert both earbuds into the case for them to recharge completely.

8. Update Firmware

Another possible explanation for your Skullcandy earbuds failing to charge could be that they are running on old firmware. This outdated software might be causing the charging issues because theThe most recent software upgrade will eliminate any malfunctions in your wireless earphones, enhancing their functionality.

Therefore, if the firmware for your Skullcandy earbuds is outdated, make sure to update it.

To upgrade the software, obtain and set up the Skullcandy application.
Then connect your earbuds with the app.
Launch the application and navigate to the product card’s update button.
If it is accessible, proceed to download and install the program.

What should be done when an update is unsuccessful?

Should the firmware update for your Skullcandy earbuds be unsuccessful, it is recommended to inspect the following items.

Ensure that your earbuds are charged to a minimum of 25% before proceeding with the update.
Your gadget has established a connection with a reliable internet service.
Ensure that your phone’s battery level is at a minimum of 30%.
Ensure that your earbuds and smartphone are paired with the Skullcandy application.

9. Keep Earbuds at a Stable Temperature

When exposed to very cold or very hot conditions, your Skullcandy earbuds may fail to charge. This is due to the fact that they are equipped with lithium-ion batteries, which can become inoperative under severe temperature conditions.

Thus, should you have been utilizing your earbuds within a sauna, amid steam, or in chilly conditions.

Because of this, they ceased to draw power. Hence, initially, you should allow your Skullcandy earbuds to return to a neutral temperature, which is essentially the temperature of the surrounding environment.

Leave your earbuds in the room for about 2 to 3 hours before attempting to recharge them.

10. Defective charging cord or power adapter.

Should your earbuds fail to charge, it’s possible that there is an issue with either the charging cable or the wall adapter.

The ineffective charging cord or power adapter is to blame for your charging case not powering up, which in turn prevents your earbuds from being charged.The initial step is to insert the charging cable into the case and check the LED indicator to see if it is working.

Should the LED on your charging case be blinking, your charging cable is in good working order. On the other hand, if the LED is not blinking, there is a problem with either the charging cable or the wall adapter.

Attempt using a different wall charger with the existing charging cable; if this fails, switch to an alternative charging cable while keeping the current wall adapter in use.

Using this method, you’ll identify what is responsible for the problem. Therefore, purchase a replacement for the item causing the issue, whether it’s the charging cable or the wall adapter.

Conclusion

Should you encounter issues with your Skullcandy earbuds failing to charge, consider the following methods to resolve the problem.

Initially, you ought to cleanse the charging contacts on the earbuds and the connecting pins within the charging case.
Ensure that the earbuds are correctly positioned within the charging case.
Reset earbuds.
Ensure the charging case is charged correctly.
Drain earbuds for 24 hours.
Upgrade the software on the earbuds.
Preserving a consistent temperature might not be appropriate.
Swap out the faulty charging cord or AC adapter.

Nonetheless, should these methods prove unsuccessful for you, reaching out to Skullcandy’s customer service team for assistance would be advisable. Alternatively, if your earbuds are still covered by their warranty, you may consider returning them in exchange for a replacement set.

Skullcandy Earbuds not Charging (10 Ways to Fix)