Raycon Earbuds Not Charging (9 Proven Fixes!)
I have been using Raycon earbuds for a few weeks, and I haven’t encountered any issues so far. However, when I connected them yesterday, the charging indicator did not illuminate.
I felt disappointed since I had eagerly anticipated incorporating them into my daily journey.
However, I realized that I needed to find a solution for this issue. As a result, I dedicated several hours to conducting research in order to discover potential remedies for it.
So, if your Raycon The earbuds are currently not being charged. try the below troubleshooting steps.
Raycon Earbuds Not Charging
If your Raycon earbuds are not able to charge, there are several potential reasons for this issue. It could be caused by dirt on the earbuds or the pins in the charging case, incorrect positioning of the earbuds within the case, software malfunctions, a defective charging case, outdated firmware, or a faulty charging cable or wall adapter. To resolve this problem, you will need to clean the charging poles and pins on the earbuds and case, ensure the earbuds are correctly placed in the case, reset the earbuds, update the firmware, and consider purchasing a new charging cable or wall adapter if necessary.
If you are unaware of the purpose and execution of each step, continue reading to acquire comprehensive knowledge on all the details.
1. Clean Earbuds
If your Raycon earbuds are not charging, it could be due to the presence of dirt or debris on the charging contacts.
Furthermore, consistent utilization of earbuds results in the accumulation of earwax on the charging terminals of the earbuds. This prevents the smooth flow of electric current and consequently hinders the charging process of the earbuds.
So, in order to resolve this issue, it is necessary for you to clean your Raycon earbuds. To do this, gather a soft cotton fabric, toothpick, and rubbing alcohol for the cleaning process.
Carefully pour a small amount of rubbing alcohol onto the cotton cloth and use it to wipe the charging poles of the earbud. After that, use a toothpick to slowly remove any dirt from the charging poles, and finally, clean off any remaining dirt with the cotton cloth.
At this point, your Raycon earbuds are prepared for the charging process.
2. Clean Charging Case Pins
Like with earbuds, it is important to ensure that the charging pins of your Skullcandy earbud’s charging case are kept clean. This is because dirt on the charging pins can alsoIf you prevent the flow of electricity, your Raycon earbuds will not be able to charge.
Therefore, it is crucial to clean the pins of the charging case as well.
alcohol on a cotton cloth and use a toothpick to carefully clean the pins.Dip the cloth in alcohol and then gently use it to cover the pins. .
Next, use a toothpick to eliminate any grime that is stuck on the pins. Afterward, wipe the pins thoroughly with a cloth to ensure they are clean.
Make sure to clean the charging poles and case pins of your Raycon earbuds before placing them inside the charging case. Once you’ve done that, put the earbuds in the case and they should begin charging.
3. Correctly position inside the container or box.
At times, your earbuds may fail to charge due to incorrect positioning of the ear tips or improper placement of the earbuds in the charging case.
First, ensure ear tips are properly positioned on the earphonesIn general, earbuds often have difficulty fitting properly in the charging case.
Next, make sure that the charging ports of the earbuds align with the pins when you insert them into the case.
Once the charging case is positioned correctly, proceed to shut the lid of the case.
Earbuds do not recharge when the lid of the case is open.
4. Reset Raycon earbuds
Occasionally, Raycon earbuds may cease to charge due to software malfunctions or errors.
Resetting is the most effective way to resolve small issues and bugs in earbuds.
Hence, it is recommended to perform a reset on your Raycon earbuds.
Here is how you can do that.
To deactivate earbuds, press and hold down both buds simultaneously. 4 seconds simultaneously .
Next, remove Raycon earbuds from your device.
Hold both buds at the same time for 30 seconds .
Place them into the charging case and close it.
Take earbuds out of the case and turn them on .
5. Faulty Charging Case
The reason why the Raycon earbuds are not able to charge is due to a problem with the charging case. Generally, when the charging case is faulty, it indicates that the battery of the case is no longer functional.
Your earbuds will not be able to charge because the charging case cannot hold a charge due to the damaged battery.
The primary reason for the malfunction of charging case batteries is typically either exposure to moisture or physical damage.
Hence, in order to resolve the issue, you can expose the case to the sun for a brief period of time.
However, if you have accidentally let go of the case, there is a possibility that the power cable is no longer attached to it.The battery is not transferring the current to the pins on the case. .
If this situation arises, it would be necessary for you to visit a gadget specialist. They will be able to resolve the issue promptly, as attempting to fix it at home would be challenging for you.
6. Properly Charge Case
able to charge the Raycon earbuds.The earbuds cease charging due to inadequate charging.
Hence, it is important to ensure that your case is charged correctly. This entails using the original USB cable to charge the case.
Additionally, ensure that the charging cable is securely inserted into the port of the charging case.
Additionally, make sure to clean both the charging cable and the charging port of the case.
7. Drain Earbuds
If your inexpensive earphones are not fully charging, the battery level does not increase even after being plugged in for several hours.
Then you should drain your The battery of the earbud lasts for a period of 24 hours.By following this method, earbuds will fully utilize the battery and any small glitches will be resolved.
To do so, To start, disconnect and take out the earbuds from all devices.Afterwards, take out both earbuds from the charging case and leave them untouched for a period of 24 hours.
In this manner, the earbuds will stay switched on, attempting to find a device to connect with, and as a result, their battery will deplete fully.
Once the battery has been depleted, put both earbuds into the case until they are completely charged.
Keep the earbuds at a consistent temperature.
If the temperature is extremely cold or hot, the charging of your Raycon earbuds may cease. This is due to the lithium-ion batteries within them, which cease functioning under such extreme temperature conditions.
If you have utilized your earbuds in a sauna, steam area, or low temperature.
Because of this, they had ceased to charge. As a result, initially, it is necessary to return your Raycon earbuds’ temperature to its normal state, which is equivalent to room temperature.
Put your earbuds in the room for a duration of 2 to 3 hours and then attempt to charge them.
The charging cable or wall adapter may be defective.
If your earbuds are not able to charge, it could be due to a problem with either the charging cable or the wall adapter for your earbuds.
Due to a defective charging cable or wall adapter, your earbud charging case is unable to charge properly, leading to a lack of charging for your earbuds.The initial step is to connect the charging cable to the case and check the LED indicator.
If the LED is flashing, it means that your charging cable is not defective. However, if the LED on your charging case is not flashing, then either the charging cable or the wall adapter is defective.
Attempt using a different wall adapter in conjunction with the existing charging cable, and if that doesn’t succeed, try using a different charging cable with the current wall adapter.
By doing this, you will be able to identify the source of the problem. Consequently, you should purchase a replacement for the item that is causing the issue, such as a charging cable or wall adapter.
Conclusion
If your Raycon earbuds are not being charged, you can attempt the following methods to resolve the issue.
- To begin, it is important to clean the charging poles and pins of the charging case for the earbuds.
- Ensure that you correctly position the earbuds inside the charging case.
- Reset earbuds.
- Ensure the charging case is correctly charged.
- Drain earbuds for 24 hours.
- Please refresh the software of the earbuds.
- Keeping the temperature may not be appropriate.
- Replace the faulty charging cable or wall adapter.
If none of these methods are effective for you, it is recommended that you reach out to Raycon’s customer support for assistance. Alternatively, if your earbuds are still covered by warranty, you can return them and receive a replacement pair.
HOW TO FIX
Galaxy Buds Not Charging No Light – Check This
How To Get The Best Sorround Sound For Gaming
Bose Qc Earbuds Flashing Red And White – Solved
How To Properly Turn Off Our Airpods Max
Aftershokz Keeps Beeping Easy Fix
How To Fix Airpod Pro Problems
Skullcandy Push Active Not Charging
REVIEWS
The AKG K553 Mkii Closed Back Reviews
JBL Reflect Flow Pro Active Earbuds True Wireless Review
