Headphones Keep Pausing My Music? easy fix

As someone who is passionate about music, I rely on my headphones to listen uninterrupted. However, over the past few days, my headphones have been interrupting my music by causing it to stop playing frequently.

It was annoying and bothering me.

As soon as I was free from my demanding routine, I began to investigate the root of the problem and how to resolve it.

Fortunately, I managed to resolve the issue quickly. Should you be experiencing a similar challenge, you’ve come to the correct place. This forum will provide solutions to all your queries. Let’s begin.

Table of Contents

How To Fix Headphones Keep Pausing My Music?

1. An audio jack or headphone connector that is not securely fastened.

The phone jack, also known as an audio jack, is a type of electrical connector utilized for transmitting analog sound signals. When you plug the jack into the socket, these signals are delivered to your headphones.

When using wired headphones, an issue may arise from an unsecured audio jack or port. If the plug of your headphones isn’t firmly connected to the jack, you may experience interruptions in your music, as the headphones will frequently pause playback due to a weak or disconnected link.

The standard jack size on your phone is 3.5mm It is important to select a phone jack and headphone cord that are compatible to ensure they work together correctly.

With prolonged use, the plug of your headphones might become distorted. Over time, it could shrink as a result of wear and tear, making it difficult to insert into the headphone socket.

Solution:

To identify the problem, try using a different set of earphones with the audio input. Should the music still intermittently stop playing, the issue likely lies with an unstable audio jack. Conversely, if the music streams smoothly without interruptions, it indicates that the plug of your headphones is defective.

To secure the wobbly audio jack, employ a few techniques to alter its dimensions.

Cut a piece of paper .
Insert it in the phone jack .
Now connect Connect your headphones to the audio jack.
Your earphones will establish a secure connection with the mobile device.

This is not a long-term fix, but it will temporarily solve the issue with your wobbly audio jack.

Conversely, if the plug of the headphones (also known as a jack) is not tight or is impaired, it can be remedied by altering the plug’s dimensions.

Take an aluminum film .
Cut a thin strip of it.
Encircle the base with the strip.Adjust the headphones connector until it properly fits into the phone’s audio port.

This is a somewhat long-lasting fix. To address the problem with the fit, it is recommended that you purchase a pair of headphones that are designed to work with your gadget.

Sometimes your headphone plug is damaged . You have to replace it Replace the existing one with a fresh version by adhering to the instructions provided here.

Cut off the cable a few centimeters away from the plug.
Expose the wires inside the cable carefully.
This includes both types of wires: those for transmitting signals, which are insulated, and those for grounding, which are typically gathered together and lack any protective covering.
Twist ground wires together.
Now untwist the new plug from the housing to expose the pads (the location at which the signal and ground cables will be attached through soldering) .
Before connecting wires, Pass the wire through the enclosure of the connector. .
Use a multimeter to determine the locations where the wires should be attached through soldering.
Following that, coat the soldered section with silicone or use a hot glue gun to provide insulation.
Now twist the housing back to the pads.

Your headphones plug is fixed.

If the warranty on your headphones has expired and you’re looking to save some cash, consider repairing them yourself. If not, reach out to the customer support team for assistance with the repairs.

2. Dirty jack or AUX port:

The majority of audio ports become clogged with grime and particles. This accumulation of dust and debris can obstruct the connection of headphones to your device.

In addition, if a jack is clogged with dust or particles, the headphones won’t be able to plug into the jack properly, leading to an unstable connection which can interrupt your music by causing it to stop playing.

Solution:

In order to eliminate the irritating interruptions in your music, ensure that the audio jack is cleaned.

Maintaining your audio jack is a simple task that can be done independently. Following are various techniques for keeping your audio jack clear of debris.

Using forced air that has been compressed.

Buy a can of compressed air .
Blow the compressed air into the jack by pressing the nozzle of the cane.

It will eliminate all the dust and various extraneous substances located within the jack.

2. By using Cotton swabs

Take cotton swabs and trim Adjust the cotton on one side to ensure it fits into the jack properly.
Insert it into the socket and scrub every surface.
Most of the debris will be removed.
To remove sticky or tough debris,
Submerge one end of the applicator in the alcohol for an even coating.
Insert it into the socket and clear out the accumulated dirt.
Next, place a fresh swab into the socket and rotate it to eliminate any remaining alcohol.

Make certain that the swab is gently covered with alcohol without being saturated or excessively wet.

3. Utilizing a paper clip with a thread or a pin:

To utilize a paperclip, straighten out one end by unfolding it.
Place the pin or unbent paperclip into the jack and use it to clear out any debris.
Since they are metallic, there is a risk of them scratching surfaces. To prevent this, securely wrap the tips with tape, ensuring the adhesive side faces outward.
Place the end of the tape-covered into the socket and clear out the accumulated fluff.
Do not stick it in the jack.

Cleaning the jack ensures a snug fit when plugging in the audio cable. This secure attachment prevents your headphones from intermittently stopping the playback of music.

3. Damaged audio jack:

Sometimes, excessive use of the audio jack can damage it. Exposure to moisture can also damage your phone jack.

A faulty audio jack will be unable to establish a connection with your wired earphones, resulting in an interruption of the music playback.

Solution :

To determine whether the faulty audio jack is the problem, you can employ the technique described below.

Obtain a multimeter and rotate its knob to select the maximum range for measuring resistance.
Attach the red wire to the audio input and fix the black wire to the connector casing.
Observe the needle’s motion on the multimeter.
If the phone jack remains stationary, it is likely broken.

Attempting to repair the broken audio jack by yourself carries significant hazards. It’s imperative to seek the assistance of a skilled technician for the jack’s replacement.

4. Faulty or malfunctioning sound wires or auxiliary cables.

Damaged audio cables can lead to missing out on various elements of the music because they are unable to correctly convey the sound.

Solution:

Newer models of headphones feature interchangeable audio cords, allowing you to swap out a worn or broken cable for a fresh one.

If the cable is non-replaceable Inspect the cable to identify the damaged section.Trim that section and reconnect the tips.Wrap the injured area to protect it from additional harm.

To ensure the longevity of your audio cables, avoid coiling them tightly.

5. Error In Control panel:

All types of headphones, whether they are connected with a wire or function wirelessly, come equipped with a control interface. In wireless headphones Control panels on headphones now feature touch-sensitive sensors located on the earcups.

These sensors include an “Automatic pause function” that stops the music whenever you remove your headphones. If the sensor responsible for this control in your headphones is malfunctioning, it could result in incorrect signals that cause the music to halt inadvertently.

Solution:

To resolve this problem, you must obtain a replacement for the control sensor from a repair shop or reach out to the customer service center for assistance.

Here’s a workaround to address this problem without having to substitute or fix anything: turn off the Auto-pause function in the specific application for your earphones.

Open the respected app on your device.
Go to the settings.
Look for the option that automatically halts playback and turn it off.

Occasionally, the presence of earwax or debris within the earpieces can interfere with the performance of the touch-sensitive controls.

You can remedy the problem by gently wiping the sensor with a soft, dry cloth.

Rebooting your audio gear might resolve the problem.

Hold down the touchpad on your earphones for a minimum of 10 seconds until you see a flashing light.
The settings on your earphones have been restored to their original factory configuration.

Certainly! Here is a paraphrased version of the text: Conversely, headphones that use cables…possess control buttons integrated within the cord that are positioned nearer to the headphones.

The buttons serve the purpose of halting the music as well as adjusting the sound level upwards or downwards. Should any of these buttons malfunction, it could lead to the continual interruption of your music playback.

This problem can be resolved by mending these buttons.
Begin by tidying the space surrounding the button using either a gentle brush or a piece of fabric moistened with isopropyl alcohol.
Now, grab a paper clip and use it to pry off the button ring.
It will release the stuck button.
Carefully scrape the bottom side of a button to reposition the ring to its original location.

6. Bluetooth range

Wireless headphones pair with your mobile device or computer through Bluetooth technology. Should your headphones move beyond the maximum range of the Bluetooth signal, the connection will be lost, resulting in an interruption of your music playback.

Additionally, large items such as bulky furniture and walls can impede the signal between your headphones and the device transmitting the audio.

Solution

1. To resolve this problem, switch off the Bluetooth function and wait for a bit before reconnecting your headphones.

To enhance the connection quality, ensure that your headphones are positioned near your device, staying within the Bluetooth connectivity limit of 30 feet.

Clear away any blockages to prevent any missed interactions.

Eliminating nearby electronic gadgets that can cause interference, such as Bluetooth-enabled devices and wireless routers, can lead to a more consistent and stable connection for your headphones.

3. If the problem persists, it’s possible that there’s a fault in the Bluetooth component of either your sender device or your headphones.

To determine the source of the issue, connect your headphones to a different device and observe the outcome. Should your audio play smoothly without interruptions, it indicates that your headphones are functioning correctly. The issue could lie with the Bluetooth component of your original device not operating as it should.

Here is an easy procedure to repair the malfunctioning component of your gadget:

Go to the device tab.
Open the settings.
Navigate to the devices.
Tap Bluetooth.
Go to storage.
Clear cache data.

The names of certain features can differ slightly based on the specific device you are using.

Most of the time it functions properly, however, if it stops working, you will need to install a new Bluetooth module.

Locate a skilled professional and swap out the Bluetooth unit.

7. Low battery

Wireless headphones operate using an integrated battery. When the battery charge diminishes, the headphones cease to function.

The majority of headphones are accompanied by an application that can be installed on your device, whether it be a smartphone, laptop, or desktop computer. This application enables you to swiftly ascertain the power status of your headphones.

Certain basic headphones lack a dedicated application for adjustments and preferences. If you’re using this type of headphones, a depleted battery may lead to them disconnecting and halting your music playback. This interruption serves as a signal that it’s time to recharge your headphones.

Solution:

Here’s how to find out the remaining power in your headphones’ battery.

By using device settings:

Pair your headphones with the device.
Open the device tab.
Go to settings.
Open the list of Bluetooth devices.
Ensure to verify the power indicator on your headphones to determine the battery’s charge status.

By using an app.

Open the app.
Navigate to the battery level.
Check battery status.

Manually:

If you are employing standard headphones, you have the option to inspect the battery level by yourself.
Plug your earphones into the power cord for charging.
Should you notice a red light, it signifies that the battery is running low.

By charging case:

When utilizing earbuds, place them into their carrying case and observe the hue of the signal light.

Should the battery exhibit an orange hue, it signifies that the charge level is depleted.

Prior to utilizing your headphones, it’s essential to power them up with a charge lasting between two to three hours.

Disconnect the charger from the power source once the indicator lights go out.

Your battery is fully charged now.

8. Outdated software

Occasionally, your electronic gadgets such as smartphones, laptops, or desktop computers require an upgrade in their software. The presence of errors and malfunctions in an old version of your device could be the reason why the music keeps stopping repeatedly.

Solution

In order to rectify the issue, upgrade your device to eliminate any existing bugs and malfunctions that may be causing interference.

To upgrade your gadget, adhere to the instructions provided:

Open the settings menu on your device.
Go to the system update.
Look for an update.
Obtain and set up any available upgrades.

Your device is now up to date.

9. Device compatibility

If the headphones you’re using don’t work well with the music-playing device, the playback might get interrupted by pauses.

Solution

Ensure that the headphones and the device work well together by trying out various sets of headphones with your device.

Additionally, you have the option to diagnose the error by plugging your headphones into a different device. Should the issue be resolved upon using the headphones with a different device, then the original device is at fault due to compatibility issues.

To determine if your headphones are compatible, consult the instructions in the manual that came with them.

To verify if your device is compatible, please adhere to the guidelines provided here.

Open the device tab.
Navigate to device settings.
Browse to the “About phone” section.

Ensure that the headphones’ manual aligns with the specified requirements.

10. Weak internet connection

Streaming live music or videos calls for a robust and reliable internet connection. An insufficient internet connection can disrupt your streaming experience.

Whenever the strength of your internet connection drops, your music will automatically stop playing.

Solution:

Ensure your gadget is linked to a consistent internet source. When utilizing cellular data, verify that the music application is permitted to access your mobile data.

If you’re connected via WiFi, test the connection speed with a speed-checking application. To enhance your internet signal, consider applying the following recommended techniques:

Ensure that your device is positioned near the router without any barriers in the way. To enhance the signal strength, consider purchasing a Wi-Fi extender.

Certain gadgets release radio frequency signals that can diminish the power of your internet connection. Eliminating these gadgets may enhance your connection quality.

You can upgrade your router to eliminate any issues and defects that impair the quality of your internet connection.

Below are a few procedures to follow in order to upgrade your router.

Proceed to locate your router’s IP address by utilizing the “ipconfig” command.
Find the IP address in Windows.
It’s now the moment to log into your router.
Access the settings for updating the firmware.
If an update is available, please proceed to download and install it.

Your router’s firmware is updated.

If refreshing your router’s software doesn’t lead to better performance, performing a reset on the device may resolve the problem.

Restarting your router is quite straightforward. To reset your router, please adhere to the following steps provided.

Search for the reset button located on the rear side of your router.
Hold down this button for 15 seconds.
Release the reset button.
Wait for your router to be powered on.

Resetting routers can enhance signal strength and assist in preventing frustrating interruptions while streaming music.

11. Incompatible phone case

Occasionally, the rigidity and mismatch of your phone cover can interfere with the complete insertion of the headphone plug into the audio port. Consequently, this leads to frequent disconnections of the headphones, interrupting your music playback.

Solution.

Before plugging in your wired headphones, take off the phone case or ensure you have a phone case that accommodates the connection.

12. Automatic pause functions available on Android and on iOS. devices

We’ve lived through a time when music persisted in playing despite unintentionally unplugging our headphones, which was both bothersome and humiliating.

With the growing popularity of headphones, technicians are updating their functionalities. Today’s advanced models include an “Auto pause feature” that automatically stops the music if the headphones are disconnected.

Additionally, on Android devices, this functionality utilizes the front-facing camera to recognize your facial presence and halts playback when you set your phone down. However, this capability consumes a significant amount of battery power.

Whenever your headphones disconnect from a device that’s sending a signal, such as a phone, laptop, or computer, or the front side fails to recognize your face, the music playback will automatically stop.

Solution:

To prevent irritating interruptions in your music, it’s necessary to turn off this function.

Proceed with the instructions outlined below to deactivate this function.
Open the device tab.
Go to the settings.
Go to the “Advanced features” section.
Activate the option “Keep the screen on while viewing” to turn it off.

13. iPhones offer a feature known as “back tap”

The back-tap functionality on iPhone 8 models and subsequent versions provides convenience to users by allowing them to execute different actions, such as returning to the home screen or stopping their music.

As an iPhone owner, you might be experiencing your music pausing intermittently due to this particular feature.

Solution

To eliminate the issue, turn off the back tap option. This can be accomplished by navigating to your iPhone’s settings. Once there, look for the back tap options and turn them off.

14. Voice assistant Siri

Siri operates as an auditory helper across iPhones, iPads, and Mac computers. It captures and interprets your vocal instructions to execute tasks.

As an iPhone user, when you activate Siri to execute a command while enjoying music, the playback will halt by itself.

At times, it might be that your music pauses because the “Hey Siri” function has been automatically activated without your consent, which could be why your headphones keep interrupting your audio playback.

Solution

To eliminate it, turn off the “Hey Siri” function and opt to operate Siri by hand when necessary.

To disable it, follow these steps:

For iPhone users:
Go to the Device tab.
Open settings.
Search for Siri.
Disable Hey Siri.
For iOS users:
Navigate to settings.
Scroll down to General.
Go to Siri and toggle off.

Google Assistant/Alexa

Google Assistant is an application with functionalities akin to Siri, available on Android devices. It shares the characteristic of interrupting music playback when activated, just as Siri does.

Solution

To resolve the problem, turn off the Google Assistant function by adhering to the instructions provided below.

Open the device tab.
Go to settings.
Search for Google Assistant.
Disable it.

You can now experience uninterrupted enjoyment of your music.

YouTube has the capability to halt music playback as well.

Certain mobile applications, including YouTube, halt music playback. There’s a “Remind me to Take a break” option available on YouTube. It aids in time management and curbs excessive screen usage.

Should you have activated this function, your music playback will automatically stop following a designated duration.

Solution:

To resolve this problem, turn off the alert notification. This can be accomplished using the method described below.

Tap your profile picture.
Navigate to settings.
Toggle the General.
Click on “Remember to Pause for a Break” and select it.
Click “off” to deactivate the function.

16. Update the headphones

At times, the old software running on your headphones may lead to them not working properly. Glitches could interrupt your tunes or warp the sound.

Solution:

To resolve the problem, it’s recommended that you upgrade your headphones using the smartphone application.

To upgrade the program, please adhere to the provided guidelines.
Open the app.
Go to settings.
Search for an update.
Obtain and set up the upgrade should it be accessible.

17. Update music app

The applications you utilize for streaming music, such as Netflix, YouTube, Apple Music, and Spotify, might be old versions. This can lead to weak connections, causing the music to pause intermittently.

Solution

To fix the issue, update your app.

To upgrade the application, adhere to the instructions provided below.
Go to the Play Store.
Search for your desired app.
Download and install the latest version.

Restore your phone’s settings to their original state.

Should everything else function correctly except for your headphones unexpectedly stopping the music, consider restoring your phone’s settings to default.

Ensure that you select “reset phone settings” rather than opting to restore the default settings.

It will fix the issue.

Conclusion

Let’s recap the various methods available to address the issue of your headphones constantly interrupting your music playback.

Regarding headphones that utilize wireless or Bluetooth connectivity.

Maintain proximity between your headphones and the device, ensuring they are no more than roughly 30 feet apart.
Ensure your headphones are charged either before you use them or once you’re done using them.
Turn off the “Auto pause function” in your headphones using the application.
Ensure that you remove any wax, dampness, or debris from the earpieces to prevent any interruptions.
Ensure that both your headphones and the corresponding application are upgraded to the latest version.
Inspect and fix any broken components.

For wired headphones.

Ensure that the size of the headphone’s connector fits properly with the audio input port.
Ensure that the audio jack is thoroughly cleaned to allow the headphone connector to fit snugly into it.
Fix or mend the distorted or broken plug on the headphones.
Avoid entwining the cords of your earphones.
Swap out the faulty wires for fresh replacements.
Inspect and fix the integrated button should it become jammed.
Buy a compatible phone case.

For both types of headphones, those that are connected with wires and those that operate without wires.

Enhance the quality of the internet connection to optimize the experience of streaming music online.
Refresh and reboot the router to improve the quality of the signal.
Turn off the auto-pause function on your devices.
Disable voice assistants.
Turn off the feature that allows tapping the back of the device to perform actions.
Make sure to refresh your music applications such as Spotify, Apple Music, and others.
Reset your device settings.

Headphones Keep Pausing My Music? easy fix

How To Fix Headphones Keep Pausing My Music?